The suppression of evaporation of water from small volumes of sample solutions or reagents for capillary electrophoresis by the use of a mineral-oil overlay was investigated in affinophoresis applications, in which the affinity constant of a mutant protein of recombinant human galectin-1 to a lactose affinophore, a triply negative charged ion having a lactoside as an affinity ligand, was determined. When an injection was carried out from a minimum of 20 muL of an aqueous solution beneath the oil overlay, no oil contamination inside the capillary was observed, provided the capillary was cleanly cut so that the end was flat, and the polyimide coating had been removed for a distance of about 2 mm from the end. Affinophoresis was carried out using 20 PL of an affinophore solution covered with an oil overlay. The abnormalities in the electropherograms as the result of the evaporation of the water from the solution during storage prior to use in an automatic operation of a capillary electrophoresis instrument were suppressed, with respect to the formation of a base line gap, an increase in the detection time of a marker ion and an increase in the initial current. A solution in a vial could be used repeatedly for a longer period of time when overlaid with mineral oil than in the absence of an overlay. The use of a mineral-oil overlay is a simple but very efficient technique for solving the problem of the evaporation of water from small volumes of aqueous solutions for use in capillary electrophoresis.