Following current trends in miniaturization of analytical chemistry, an inexpensive disposable analytical tool in the form of a liquid chromatography column fabricated on a poly(dimethyl siloxane) (PDMS) chip was created. Ease of fabricating the chromatography column was demonstrated by molding collocated monolithic support structures (COMOSS) directly in the column. Positive photo-resist, SPR 220, was used to create column structures on a negative relief master providing final channel dimensions of 2.7-5.2 mum wide by 10.0 mum deep, while monolithic dimensions were 9.8 x 9.8 x 10.0 mum - 12.3 x 12.3 x 10.0 mum. The ability to separate biological samples such as peptides from a tryptic digest of fluorescein isothiocyanate labeled bovine serum albumin (FITC-BSA) was shown. Separations in capillary electrochromatographic (CEC) mode were performed yielding column efficiencies of 4.0 x 10(5) plates/m.