Results from a 1-dimensional and semirigorous model for atmospheric and circulating fluidized bed biomass gasifiers (CFBBGs), presented in the (previous) paper by Corella and Sanz [J. Corella, A. Sanz, Modeling circulating fluidized bed biomass gasifiers. A pseudo-rigorous model for stationary state. Fuel Process. Technol. 86 (2005) 1021-1053], are shown here. Process variables predicted by the model are gas composition (H-2, CO, CO2, CH4, C2Hn, H2O and O-2 contents), gas yield, tar content in the flue gas and char concentration in the solids. Both axial profiles in the riser and values at the gasifier exit are calculated from the model and are shown here for some selected sets of process variables. Variables analyzed in depth are: total air flow (used as equivalence ratio, ER), percentage of secondary air flow, height (location) of the secondary air flow, biomass moisture and biomass flow rate, expressed as the biomass weight hourly space velocity in the gasifier. All the results from the model agree both with known published data and with some tests made to check the model. (C) 2005 Elsevier B.V. All rights reserved.