A poly-generation process of simulated circulating fluidized bed (CFB) combustion combined with coal pyrolysis was developed in a laboratory scale. Pyrolysis characteristics of three bituminous coals with high volatile contents were investigated in a fixed bed with capacity of 10 kg solid samples. The effects of initial temperature of solid heat carrier, pyrolysis holding time, blending (ash/coal) ratio and coal particle size on gas and tar yields were studied experimentally. The results indicate that the initial temperature of the heat carrier is the key factor that affects the gas and tar yield, and the gas composition. Most of the gas and the tar are released during the first few minutes of the pyrolysis holding time. For caking coal, the amount of char agglomerating on the pyrolyzer inner wall is reduced by enhancing the blending ratio. The experimental results may provide basic engineering data or information for the process design of CFB combustion combined with coal pyrolysis in a large scale. (C) 2006 Elsevier B.V. All rights reserved.