Zinc oxide based film bulk acoustic resonator as mass sensor was fabricated by multi-target magnetron sputtering under optimized deposition condition. Each layer of the device was well crystallized and highly textural observed by transmission electron microscopy and X-ray diffraction measurement. Through piezoelectric test, the device vibrated with significant distance. The influence of top electrode on resonant frequency and the bio-specimen of mass loading effect were investigated. Data show that the device has qualified properties as mass biosensor, with a resonant frequency of 3-4 GHz and a high sensitivity of 8-10 kHz cm(2)/ng. (C) 2007 Elsevier B.V. All rights reserved.