A single bubble experiment is developed for the determination of the capture efficiency by rising bubbles in a uniform concentration of small inertialess glass particles under carefully controlled hydrodynamics and physico-chemical conditions. Air bubbles (0.35-1.3 mm in diameter) rise and reach their terminal velocity in clean water before passing through a suspension of particles (15-56 mu m in size), where capture takes place. After passing through another zone containing pure water to remove particles trapped in their wake, bubbles release captured particles at the surface from where the particles are collected and counted. A capture efficiency is then calculated as the ratio of the number of particles captured by one rising bubble to the number of particles present in the volume swept out by this bubble. Capture efficiencies range between 10(-3) and 5 x 10(-1) and are in the order of magnitude of the experimental results presented by Ralston and Dukhin [1999. The interaction between particles and bubbles. Colloids and Surfaces A: Physicochemical and Engineering Aspects 151, 3-14] as well as of numerical results for collision efficiency presented by Sarrot et al. [2005. Determination of the collision frequency between bubbles and particles in flotation. Chemical Engineering Sciene 60 (22), 6107-6117]. (C) 2007 Elsevier Ltd. All rights reserved.