Surface treatment is often necessary for strong composites. But the challenge for developing countries is to find chemicals and treatment procedures that are cheap and simple but maintain good composite properties. Mercerization followed by silane treatment of natural fibres is among the simplest and cheapest methods used to improve composite interfaces. This study investigates the effectiveness of this method to improve the bond between Agave americana fibres and post consumer HDPE. The influence of fibre extraction method, mercerization and mercerization followed by silane treatment on interfacial shear strength (ISS) and fibre properties is determined. The results indicate that ISS values are generally low but mercerization doubles the ISS values between Agave americana fibres extracted by traditional boiling of leaves and post consumer HDPE. Mercerization also improves fibre tensile and thermal properties. While triethoxyvinylsilane treatment of fibres after mercerization does not improve the ISS, it does not reduce it either, nor does it reduce tensile and thermal strengths of mercerized fibres. Fibres from non-boiled leaves resulted in poor fibre tensile strengths but improved ISS. There is a potential to use mercerization as cheap, simple technique to make Agave americana HDPE composites to provide cheap roof ceilings in Lesotho.