The Cu-containing nitrite reductase from Alcaligenes faecalis S-6 catalyzes the one-electron reduction of nitrite to nitric oxide (NO). Electrons enter the enzyme at the so-called type-1 Cu site and are then transferred internally to the catalytic type-2 Cu site. Protein film voltammetry experiments were carried out to obtain detailed information about the catalytic cycle. The homotrimeric structure of the enzyme is reflected in a distribution of the heterogeneous electron-transfer rates around three main values. Otherwise, the properties and the mode of operation of the enzyme when it is adsorbed as a film on a pyrolytic graphite electrode are essentially unchanged compared to those of the free enzyme in solution. It was established that the reduced type-2 site exists in either an active or an inactive conformation with an interconversion rate of similar to 0.1 s(-1). The random sequential mechanism comprises two routes, one in which the type-2 site is reduced first and subsequently binds nitrite, which is then converted into NO, and another in which the oxidized type-2 site binds nitrite and then accepts an electron to produce NO. At high nitrite concentration, the second route prevails and internal electron transfer is rate-limiting. The midpoint potentials of both sites could be established under catalytic conditions. Binding of nitrite to the type-2 site does not affect the midpoint potential of the type-1 site, thereby excluding cooperativity between the two sites.