We investigated a remediation process for diesel-contaminated soil, in which water was used to remove the diesel from the soil and peat was used to absorb the diesel layer formed on the surface of the water. The percolation of water through the soil was uniform. The time required for water to percolate the soil and for the layers (soil, water, and diesel) to separate depended on the soil depth. Both the depth of soil and mixing affected the thickness of the diesel layer and thus diesel revovery from the contaminated soil Higher diesel recovery was achieved with smaller soil depth and mixing The initial moisture content and the lower heating value of the peat were 7.1% and 17.65 MJ/kg, respectively. The final moisture content and lower heating value of the diesel-contaminated peat obtained from the experiment with mixing were 8.65-10.80% and 32.57-35.81 MJ / kg, respectively. The energy content of the diesel-contaminated peat is much higher than that of coal and the moisture content is within the range recommended for biomass gasification.