화학공학소재연구정보센터
Korean Journal of Chemical Engineering, Vol.26, No.4, 1144-1154, July, 2009
CFD simulation of coal-water slurry flowing in horizontal pipelines
E-mail:
An Eulerian multiphase approach based on kinetic theory of granular flow was used to simulate flow of coal-water slurries (CWS) in horizontal pipelines. The RNG k-ε turbulent model was incorporated in the governing equation to model turbulent two-phase flow with strong particle-particle interactions. In this model, the coal particles with bimodal distribution were considered as two solid-phase components, and the moment exchange between solid and liquid as well as that between solid and solid were accounted for. The model was firstly validated with pressure gradient and concentration profile data from the open literature, and then validated with pressure gradient data of the authors’ experiments. The effects of influx velocity, total influx concentration and grain composition were numerically investigated, and the results have displayed some important slurry flow characteristics, such as constituent particle concentration distribution and velocity distribution as well as pressure gradients, which are very difficult to display in the experiments. The results suggest that both gravity difference between large and small particles and strong particleparticle interaction had significant effects on concentration distribution as well as velocity distribution.
  1. Choi YC, Park TJ, Kim JH, Lee JG, Hong JC, Kim YG, Korean J. Chem. Eng., 18(4), 493 (2001)
  2. Lahiri SK, Ghanta KC, The 17th international conference on the hydraulic transport of solids, Cape town, Southern African, 149 (2007)
  3. Beata NZ, Wojciech Z, International Journal of Refrigeration, 29, 429 (2006)
  4. Hsu FL, Ph.D. thesis, AAI8726087, University of Illinois at Chicago, Chicago, IL (1987)
  5. Assar MH, Ph.D. thesis, AAI9720393, Case Western Reserve University, OH (1996)
  6. Ling J, Skudarnov PV, Lin CX, Ebadian MA, International Journal of Heat and Fluid Flow, 24, 389 (2003)
  7. Lin CX, Ebadian MA, Computers & Fluids, 37, 965 (2008)
  8. Xu J, Rouelle A, Smith KM, Celik D, Hussaini MY, Van Sciver SW, Cryogenics, 44, 459 (2004)
  9. Cornelissen JT, Taghipour F, Escudie R, Ellis N, Grace JR, Chem. Eng. Sci., 62(22), 6334 (2007)
  10. Lettieri P, Di Felice R, Pacciani R, Owoyemi O, Powder Technol., 167(2), 94 (2006)
  11. Panneerselvam R, Savithri S, Surender GD, Chem. Eng. J., 132(1-3), 159 (2007)
  12. Roy S, Dudukovic MP, Ind. Eng. Chem. Res., 40(23), 5440 (2001)
  13. Cheng Y, Zhu JX, Can. J. Chem. Eng., 83(2), 177 (2005)
  14. Liu YB, Chen JZ, Yang YR, Journal of Zhejiang University (Engineering Science), 40 (2006)
  15. Ookawara S, Street D, Ogawa K, Chem. Eng. Sci., 61(11), 3714 (2006)
  16. Kaushal DR, Kimihiko S, Takeshi T, Katsuya F, Yuji T, International Journal of Multiphase Flow, 31, 809 (2005)
  17. Skudarnov PV, Lin CX, Ebadian MA, Journal of Fluids Engineering, 126, 125 (2004)
  18. Gidaspow D, Multiphase flow and fluidization: Continuum and kinetic theory descriptions, Academic Press, New York (1994)
  19. He YR, Chen HS, Ding YL, Lickiss B, Chem. Eng. Res. Des., 85(A7), 963 (2007)
  20. Jenkins JT, Savage SB, J. Fluid Mech., 130, 187 (1983)
  21. Ding J, Gidaspow D, AIChE J., 36, 523 (1990)
  22. Lun CKK, Savage SB, Jeffrey DJ, Chepurniy N, Journal of Fluid Mechanics, 140, 223 (1984)
  23. Ogawa S, Umemura A, Oshima N, Z. Angew. Math. Phys., 31, 483 (1980)
  24. Johnson PC, Jackson R, J. Fluid Mech., 176, 67 (1987)
  25. Yang J, Chalaturnyk RJ, 3rd international conference on computational methods in multiphase flow, Xi’an (2005)