화학공학소재연구정보센터
Journal of the Korean Industrial and Engineering Chemistry, Vol.20, No.4, 407-410, August, 2009
KMnO4 /실리카-알루미나 상에서 에틸렌 제거: 합성 방법과 반응온도의 영향
Removal of Ethylene Over KMnO4/Silica-alumina: Effect of Synthesis Methods and Reaction Temperatures
E-mail:
초록
실리카-알루미나의 Si/Al 조성이 1:5, 1:10 및 0:1 (100% 알루미나)에 KMnO4를 18∼20중량% 담지시킨 KMnO4 /실리카-알루미나와 KMnO4 /알루미나를 용매증발법으로 제조하였다. 이 촉매를 사용하여 GHSV = 1125 h^(-1), 에틸렌이 포함된 혼합가스(에틸렌 0.2%, 공기 99.8%, 상대습도 50%)를 30℃, 40℃, 60℃, 150℃에서 고정층 반응기를 사용하여 각 촉매들에 대해 에틸렌 제거율을 비교하였다. 그 결과 실리카-알루미나 담체를 사용한 촉매가 알루미나 담체를 사용한 촉매보다 30∼150℃온도 범위에서 우수한 성능을 보여주었는데, 30∼40℃에서는 170∼210%, 60℃및 150℃에서는 약 60% 우수한 성능을 보여주었다.
18∼19 wt% KMnO4/SiO2-Al2O3 with Si/Al = 1/5 and 1/10, and 20 wt% KMnO4/Al2O3 were prepared by solvent evaporation method. Catalytic activity of ethylene abatement over those samples were evaluated and compared under the conditions of GHSV 1125 h^(-1), ethylene gas (ethylene 0.2%, air 99.8%, relative humidity 50%) at 30, 40, 60 and 120℃ using a fixed-bed reactor. KMnO4/SiO2-Al2O3 was showed better performance than KMnO4/Al2O3 by 170∼210% at 30, 40℃, and by 60% at 60, 150℃, respectively.