Using a liquid-phase epitaxy method, YBa2Cu3O6+delta (YBCO) films were grown on NdGaO3 (NGO) substrates. Their growth orientation was investigated as a function of growth temperature. At growth temperatures higher than 980 degrees C, c-axis (YBCO < 001 >)-oriented films that were perpendicular to the substrate surface were obtained on both NGO(110) and NGO(001) substrates. At growth temperatures lower than 970 degrees C, YBCO films tended to grow with an a-axis orientation on NGO(110) substrates and a-/c-axis mixture film on NGO(001) substrates. It is difficult to explain these growth behaviors merely by the thermal expansion difference between the substrate and the film, supersaturation effect reported or strain energy caused by the misfit. Therefore, another factor affecting YBCO orientation with growth temperature and substrate orientation should be superimposed on these apparent factors. (C) 2008 Elsevier B.V. All rights reserved.