화학공학소재연구정보센터
Korean Journal of Chemical Engineering, Vol.27, No.1, 62-65, January, 2010
Catalytic hydrocracking of bitumen at mild experimental condition
E-mail:
Abstract.Mo-containing catalysts were prepared by impregnation method using silica-based porous supports and their physical properties were characterized by BET, XRD and TEM. Catalytic hydrocracking of bitumen extracted from oil sand was carried out in a high pressure reactor using Athabasca oil sand over 5 wt% Mo containing catalyst supported on SiO2, MCF(Meso Cellular Foam) and SBA-15, respectively, under the conditions of 200 ℃, 20 h and 10 atm of H2 gas. Catalytic hydrocracking activity was estimated by analyzing H/C mole ratio based on EA data, and TGA was employed to compare the thermal behavior of bitumen before and after reaction. Upon hydrocracking over Mo/MCF catalyst, H/C was increased from 1.50 (bitumen itself) to 1.66.
  1. Mossop GD, Science, 207, 145 (1980)
  2. Zhang S, Liu D, Deng W, Que G, Energy & Fuels, 21, 3057 (2009)
  3. Minderhoud JK, van Veen JAR, Hagan AP, Stud. Surf. Sci. & Catal., 127, 3 (1999)
  4. Yang H, Fairbridge C, Ring Z, Hawkins R, Hill JM, Stud. Surf. Sci. & Catal., 141, 543 (2002)
  5. Yang H, Fairbridge C, Hill JM, Ring Z, Catal. Today, 93-95, 457 (2004)
  6. Ferdous D, Dalai AK, Adjaye J, Fuel, 85, 1286 (2006)
  7. Kim MC, Kim KL, Korean J. Chem. Eng., 13(1), 1 (1996)
  8. Vit Z, Cinibulk J, Gulkova D, Appl. Catal. A: Gen., 272(1-2), 99 (2004)
  9. Ge H, Li X, Qin Z, Liang F, Wang J, Korean J. Chem. Eng., 26(2), 576 (2009)
  10. Shimada H, Yoshitomi S, Sato T, Matsubayashi N, Imamura M, Yoshimura Y, Nishijima A, Stud. Surf. Sci. & Catal., 106, 115 (1997)
  11. Byambajav E, Ohtsuka Y, Appl. Catal. A: Gen., 252(1), 193 (2003)
  12. Koseoglu RO, Phillips CR, Fuel, 67, 552 (1988)
  13. Yoon SH, Bhatt SD, Lee WK, Lee HY, Jeong SY, Baeg JO, Lee CW, Korean J. Chem. Eng., 26(1), 64 (2009)
  14. Zhao DY, Feng JL, Huo QS, Melosh N, Fredrickson GH, Chmelka BF, Stucky GD, Science, 279(5350), 548 (1998)
  15. On DT, Kaliaguine S, J. Am. Chem. Soc., 125(3), 618 (2003)
  16. Miki Y, Yamadaya S, Oba M, Sugimoto Y, J. Catal., 83, 371 (1983)
  17. Khulbe KC, Manna RS, Lamarche AM, Lamarche G, MacPhee JA, Fuel Peocess. Technol., 35, 303 (1993)
  18. KHULBE KC, MANN RS, LAMARCHE AM, LAMARCHE G, MACPHEE JA, Fuel Process. Technol., 41(1), 1 (1994)
  19. Benbouzid M, Hafsi S, Fuel, 87, 1585 (2008)
  20. Ni ZH, Zong ZM, Zhang LF, Zhou SL, Xiong YC, Wang XH, Wei XY, Energy Fuels, 16(5), 1154 (2002)
  21. Kouzu M, Kuriki Y, Uchida K, Sakanishi K, Sugimoto Y, Saito I, Fujii D, Hirano K, Energy Fuels, 19(3), 725 (2005)