Current models for hydrate formation in subsea pipelines require an arbitrary assignment of a subcooling criterion for nucleation. In reality hydrate nucleation times depend on both the degree of subcooling and the amount of time the fluid has been subcooled. In this work. differential scanning calorimetry was applied to study hydrate nucleation for gas phase hydrate formers. Temperature ramping and isothermal approaches were combined to explore the probability of hydrate nucleation for both methane and xenon. A system-dependent subcooling of around 30 K was necessary for hydrate nucleation from both guest molecules. In both systems, hydrate nucleation occurred over a narrow temperature range (2-3 K). The system pressure had a large effect on the hydrate nucleation temperature but the ice nucleation temperature was not affected over the range of pressures investigated (3-20 MPa). Cooling rates in the range of (0.5-3 K/min) did not have any statistically significant effect on the nucleation temperature for each pressure investigated. In the isothermal experiments, the time required for nucleation decreased with increased subcooling. (C) 2008 Elsevier Ltd. All rights reserved.