In this paper, a PEM fuel cell model for cold-start simulations has been employed for numerical investigations of the cell startup characteristics from subfreezing temperatures. The effects of many key parameters on fuel cell isothermal cold-start behaviors have been carefully examined. Numerical results indicate that a high gas flow rate in the cathode gas channel, a low initial membrane water content, a low current density under the constant current condition, and a high cell voltage under the constant cell voltage operation are beneficial for the PEM fuel cell isothermal cold-start processes. Increasing the startup cell temperature would significantly delay ice formation and consequently lead to longer cold-start time. Therefore, incorporating internal and external heating sources in the cell design scheme is very important for achieving fast and successful cold start of a PEM fuel cell from subfreezing temperatures. (C) 2008 Elsevier Ltd. All rights reserved.