The two-phase combustion model for biomass char combustion in a riser of a dual fluidized bed gasification unit that has been presented in part I is validated using the data obtained from the 8 MWth dual fluidized bed reactor at Guessing/Austria. The model is capable of calculating the average temperatures in all zones, the gas phase composition, solid hold up, char feed rates and air ratio. The model predictions for the temperature profile along the riser and for the exiting gas composition are in good agreement with the measured values. The simulation results show that the residual char from the gasifier is only partly converted in the riser for char particles larger than 0.6 mm. Un-combusted char is circulated back into the gasification reactor. Parameter variations show that the exact location where additional liquid fuels are introduced in the middle zone of the riser does not affect the global behaviour of the combustion reactor. Based on the simulation results it is proposed that external supply of char (additional) may be a very effective method for reducing producer gas recycling to the riser, which is currently necessary to obtain the desired gasification temperatures. (C) 2008 Elsevier B.V. All rights reserved.