Fuel Processing Technology, Vol.90, No.3, 422-427, 2009
Refining of biodiesel by ceramic membrane separation
A ceramic membrane separation process for biodiesel refining was developed to reduce the considerable usage of water needed in the conventional water washing process. Crude biodiesel produced by refined palm oil was micro-filtered by ceramic membranes of the pore size of 0.6, 0.2 and 0.1 mu m to remove the residual soap and free glycerol, at the transmembrane pressure of 0.15 MPa and temperature of 60 degrees C. The flux through membrane maintained at 300 L m(-2) h(-1) when the volumetric concentrated ratio reached 4. The content of potassium, sodium, calcium and magnesium in the whole permeate was 1.40, 1.78, 0.81 and 0.20 mg/kg respectively, as determined by inductively coupled plasma-atomic emission spectroscopy. These values are lower than the EN 14538 specifications. The residual free glycerol in the permeate was estimated by water extraction, its value was 0.0108 wt.%. This ceramic membrane technology was a potential environmental process for the refining of biodiesel. (c) 2008 Elsevier B.V. All rights reserved