화학공학소재연구정보센터
Fuel Processing Technology, Vol.90, No.6, 825-834, 2009
Effect of rice husk ash addition on CO2 capture behavior of calcium-based sorbent during calcium looping cycle
Rice husk ash/CaO was proposed as a CO2 sorbent which was prepared by rice husk ash and CaO hydration together. The CO2 capture behavior of rice husk ash/CaO sorbent was investigated in a twin fixed bed reactor system, and its apparent morphology, pore structure characteristics and phase variation during cyclic carbonation/calcination reactions were examined by SEM-EDX, N-2 adsorption and XRD, respectively. The optimum preparation conditions for rice husk ash/CaO sorbent are hydration temperature of 75 degrees C, hydration time of 8 h, and mole ratio Of SiO2 in rice husk ash to CaO of 1.0. The cyclic carbonation performances of rice husk ash/CaO at these preparation conditions were compared with those of hydrated CaO and original CaO. The temperature at 660 degrees C-710 degrees C is beneficial to CO2 absorption of rice husk ash/CaO, and it exhibits higher carbonation conversions than hydrated CaO and original CaO during multiple cycles at the same reaction conditions. Rice husk ash/CaO possesses better anti-sintering behavior than the other sorbents. Rice husk ash exhibits better effect on improving cyclic carbonation conversion of CaO than pure SiO2 and diatomite. Rice husk ash/CaO maintains higher surface area and more abundant pores after calcination during the multiple cycles; however, the other sorbents show a sharp decay at the same reaction conditions. Ca2SiO4 found by XRD detection after calcination of rice husk ash/CaO is possibly a key factor in determining the Cyclic CO2 capture behavior of rice husk ash/CaO. (C) 2009 Elsevier B.V. All rights reserved.