A carbon-based solid acid catalyst was prepared by the sulfonation of carbonized vegetable oil asphalt and used to catalyze the transesterification of methanol with cottonseed oil. This catalyst was characterized by scanning electron microscopy/energy dispersive spectroscopy, BET surface area and pore size measurement, thermogravimetry analysis and Fourier transform infrared spectroscopy. The sulfonated multi-walled carbon nanotubes (s-MWCNTs) was also prepared and used to catalyze the same transesterification as the asphalt catalyst. The asphalt-based catalyst shows higher activity than the s-MWCNTs for the production of biodiesel, which may be correlated to its high acid site density, its loose irregular network and large pores can provide more acid sites for the reactants. The conversion of cottonseed oil 89.93% was obtained (using the asphalt-based catalyst) when the methanol/cottonseed oil molar ratio was 18.2, reaction temperature at 260 degrees C, reaction time 3.0 h and catalyst/cottonseed oil mass ratio of 0.2%. Also, it can be re-used. The sulfonated polycyclic aromatic hydrocarbons provide an electron-withdrawing function to keep the acid site stable. The catalyst can substantially reduce energy consumption and waste generation in the production of biodiesel. (C) 2009 Elsevier B.V. All rights reserved.