화학공학소재연구정보센터
Industrial & Engineering Chemistry Research, Vol.47, No.17, 6525-6537, 2008
Aqueous metronidazole degradation by UV/H2O2 process in single-and multi-lamp tubular photoreactors: Kinetics and reactor design
A kinetic model was developed to predict the removal of aqueous metronidazole utilizing the UV/H2O2 process. The rate constant for the reaction between metronidazole and hydroxyl radicals was determined to be 1.98 x 10(9) M-1 s(-1). The model was able to predict an optimal initial H2O2 dose and the inhibitory effects of high H2O2 doses and bicarbonate ions in the aqueous solution. Simulations were performed for three different photoreactors treating a 6,mu M solution of metronidazole at various influent H2O2 doses and photoreactor radii. The predicted removal rates of metronidazole were 4.9-13% and 14-41% for the single-lamp and multilamp photoreactors, respectively. Selection of a photoreactor radius for maximum metronidazole removal varied with influent H2O2 concentration. The lowest operational cost of $0.05 per mmol removed was projected for the multilamp photoreactor. Operationally, it was cost-effective to utilize higher UV lamp output (36W), while keeping influent H2O2 concentration low (25 mg/L).