The importance of diffusion-controlled (DC) effects on controlled radical polymerization (CRP) processes has been rather controversial and usually considered only if there is some mismatch between experimental data and model predictions of polymerization rate and molecular weight averages. Results from an experimental study designed to create conditions in which DC effects may be present from the outset for the bimolecular nitroxide-mediated radical polymerization (NMRP) of styrene in the presence of 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) and dibenzoyl peroxide (BPO), are presented herein. The experiments consisted of adding size exclusion chromatography (SEC) polystyrene (PS) standards or nitroxyl-capped PS (of different molecular weights, in several proportions), to a conventional recipe of bimolecular NMRP of styrene, and studying the effect of their presence on polymerization rate and molecular weight development. A previously developed kinetic model for NMRP of styrene was modified to take into account the presence of prepolymer as an inert "solvent," or as a monomolecular "controller" of high molecular weight. The effects of DC reactions (propagation, termination, activation, and deactivation of polymer radicals) were modeled using conventional free-volume theory. Reasonably, good agreement between experimental data and model predictions with either modeling approach was obtained. It was concluded that DC effects are weak in the NMRP of styrene, even in the presence of prepolymer. (c) 2008 Wiley Periodicals, Inc. J Appl Polym Sci 109: 3665-3678, 2008.