The aim of this work is to study the valorization of regenerated low density polyethylene (rLDPE) by blending with PVC in the presence of chlorinated polyethylene (CPE) as compatibilizer. For this purpose, four rLDPE samples coming from neat or dirty wastes were used. They were obtained after milling, washing, and extrusion in a conventional recycling plant. They were first characterized in terms of physicochemical (density, melt flow index, water absorption, and level of oxidation by Fourier transform infrared spectroscopy) and mechanical (tensile and shore D hardness) properties. The effect of the ratio of PVC on these physical and mechanical properties was then investigated. These binary blends exhibited lower properties than those of the separated polymers. The addition of CPE to the binary blend with weight proportion of 50/50 leads to a substantial improvement of the considered properties which is due to a better interfacial adhesion between rLDPE and PVC as evidenced by the analysis of the morphology of the blends by scanning electron microscopy. (C) 2008 Wiley Periodicals, Inc.