It appears to be quite a few national and international studies were reported regarding flocculation and settling properties of ceramic industry wastewater containing various mineral matters. Cleaning of ceramic industry wastewaters with ever increasing environmental standards needs effective and economical solid-liquid separation processes. In this study, quantity and type of optimum flocculant concentration were investigated for solid-liquid separation of Umpac ceramic plant (located at Usak, Turkey) wastewaters. A new generation of flocculants namely unique molecular architecture (UMA) are used to obtain high settling velocity along with high solid content waste and circulation water with low turbidity values. Zeta potential of the tailings including quartz, feldspar, clorite, and mica was also measured at different pH values. The flocculation tests were performed in the presence of different types of polymers at different polymer dosages. It seems that Magnafloc 5250 shows higher performance than the anionic flocculant SPK 508 and other anionic UMA flocculants Magnafloc 6260 and Magnafloc 3230. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 112: 1258-1264, 2009