Processability at extrusion coating and mechanical properties of the films obtained are investigated by means of linear and nonlinear rheological measurements and tensile tests for blends of polypropylene (PP) and linear low-density polyethylene (LLDPE). Both materials are produced by metallocene catalyst. The processability of PP is found to be improved by the addition of LLDPE; the blend shows low level of motor torque and head pressure ill all extruder and small level of neck-in as compared With pure PP. Further, the anisotropy of ultimate tensile strength, which is prominent for PP, is reduced by blending with LLDPE. As a result, the blend having 20 wt% of LLDPE shows appropriate properties in the molten state for extrusion coating and in the solid state as a film. (C) 2009 Wiley, Periodicals, Inc. J Appl Polym Sci 113: 3368-3375, 2009