Chloromethylated styrene-divinylbenzene copolymers were post-crosslinked through Fredel-Crafts alkylation reaction and a water-compatible hypercrosslinked resin HJ-1 was developed successfully. It can be wetted directly by water and can be used without any wetting process. It was applied to remove p-nitrophenol in aqueous solution in comparison with the commercial Amberlite XAD-4 resin. Their adsorption behaviors for p-nitrophenol were conducted and it was found the adsorption dynamics obeyed the pseudo-second-order rate equation and the intra-particle diffusion was the rate-limiting step. The adsorption isotherms call be correlated to Freundlich isotherm and the adsorption capacity onto HJ-1 resin was much larger than XAD-4. The maximum adsorption capacity of p-nitrophenol for HJ-1 resin was measured to be 179.4 mg/g with the equilibrium concentration at 178.9 mg/l and the maximum removal percentage was predicted to be 98.3%. The adsorption thermodynamic parameters were calculated and the adsorption was mainly driven by enthalpy change. The micropore structure, the size matching between the pore diameter of HJ-1 resin and the molecular size of p-nitrophenol, and polarity matching between the formaldehyde carbonyl groups of HJ-1 resin and p-nitrophenol bring the larger adsorption capacity and higher adsorption affinity. (c) 2008 Elsevier Inc. All rights reserved.