AlN is generally used as buffer layer for the epitaxial growth of GaN on Si(1 1 1) substrate. In this work, we specifically address the relationship between the way the AlN growth is initiated on the Si(1 1 1) surface and the overall properties of the final GaN epitaxial layer. The growth is performed by molecular beam epitaxy with ammonia (NH3) as nitrogen source. Two procedures have been compared: exposing the Si surface first to NH3 or Al. The AlN nucleation is followed in real-time by reflection high-energy electron diffraction and critical stages are also investigated in real space using scanning tunnelling microscopy and transmission electron microscopy. Atomic force microscopy, X-ray diffraction and photoluminescence are also used to assess the properties of the final GaN epitaxial layer. It is shown that best results in terms of GaN overall properties are obtained when the growth is initiated by exposing the Si(1 1 1) surface to NH3 first. This is mainly due to the fact that almost an order of magnitude decrease of the dislocation density is obtained. (C) 2009 Elsevier B.V. All rights reserved.