In this work. the electrochemical oxidation on boron-doped diamond of synthetic wastes polluted with surfactant sodium dodecylbenezenesulfonate (SDBS) has been studied. Results show that SDBS can be successfully removed with this technology inside different current densities and concentration ranges. The oxidation of the SDBS seems to occur in two main sequential steps: the first is the rapid degradation of SDBS, and the final is the less efficient oxidation of aliphatic intermediates to carbon dioxide. The nature of supporting electrolyte (NaCl, Na2SO4 and K3PO4) influences on the efficiency of the electrochemical oxidation process. The treatment of the NaCl solution seems to be more efficient in the chemical oxygen demand (COD) removal, while the sulphate and specially the phosphate media improve the TOC removal. However, in spite of this observation, chemical oxidation of SDBS by different types of oxidants cannot explain alone the results of the electrochemical oxidation with diamond anodes. This suggests that the synergistic effect of the different oxidation mechanisms that occurs into the electrochemical cell (direct oxidation and mediated oxidation by hydroxyl radicals and by oxidants formed from the electrolyte) is the responsible of the great efficiencies obtained with this technology in the treatment of organics. (c) 2008 Elsevier B.V. All rights reserved.