This work is focussed on the application of an electrochemical technology to regenerate the bonding agent of a polymer-supported ultrafiltration process, technique commonly used to remove metal ions from wastewaters. To do this, a batch rotating-electrode electrochemical cell has been set up to recover the copper bind to partially ethoxylated polyethyleneimine by electrodeposition. The influence of the main parameters (current efficiency, stirring rate, pH, electrode material and nature of the counterion) on the performance of the process has been studied. Current efficiency is clearly enhanced with the stirring rate, reaching values as high as 0.93 for the optimum working conditions. Regarding pH, this variable has been observed to play an important role in process efficiency. Thus, it has been found that the reactor can operate at pH 4 without affecting process performance. This is a clear advantage with respect to other regeneration techniques and also to previous works of electrochemical regeneration. The electrode material seems to have a clear influence on process behaviour and especially on the appearance of a first transitory stage with lower current efficiency. Finally, the electrolyte salt also influences significantly on the results and the presence of sulphate as counterion leads to the best system performance. (C) 2009 Elsevier B.V. All rights reserved.