The printed circuit boards (PCBs) contain nearly 70% nonmetal materials, which usually are abandoned as an industrial solid-waste byproduct during the recycling of waste PCBs. However those materials have abundant high-value glass fibers. In this study. a novel fluidized bed process technology for recycling glass fibers from nonmetal materials of waste PCBs is studied. The recycled glass fibers (RGF) are analyzed by determination of their purity, morphology and surface chemical composition. This process technology is shown to be effective and robust in treating with nonmetal materials of waste PCBs. The thermoset resins in the nonmetal materials are decomposed in the temperature range from 400 degrees C to 600 degrees C. And the glass fibers are collected at high purity and recovery rate by the cyclone separators without violating the environmental regulation. This novel fluidized bed technology for recycling high-value glass fibers from nonmetal materials of waste PCBs represents a promising way for recycling resources and resolving the environmental pollutions during recycling of waste PCBs. (C) 2009 Elsevier B.V. All rights reserved.