Micro-proton exchange membrane fuel cells are considered to be the next generation power sources for micro-scale power applications, but onboard hydrogen storage and generation with high energy density at the small scale is still a technical barrier. This paper introduces a hydrogen generation method based on an onboard hydride fuel and a byproduct water recovery mechanism for micro-hydrogen PEM fuel cells. The water recovery is carried out by water diffusion from the more humid cathode side to the less humid anode side through the proton exchange membrane. The micro-fuel cells based on this water recovery method were constructed and tested. The results demonstrate that the relative humidity has a significant affect on the fuel cell performance as well as the opening area on the cover layer, the type of hydrides, and the thickness of the Nafion membrane also can affect the fuel cell performance. A 10 mm(3) prototype water recovery micro-fuel cell has been built and tested, and the device has produced a maximum power density of 104 W L-1 and a maximum energy density of 313 W h L-1. (C) 2009 Elsevier B.V. All rights reserved.