A high efficient assembly technique for large proton exchange membrane fuel cell (PEMFC) stacks is proposed to obtain the optimal clamping load. The stack system is considered as a mechanical equivalent stiffness model consisting of numerous elastic elements (springs) in either series or parallel connections. We first propose an equivalent stiffness model for a single PEM fuel cell, and then develop an equivalent stiffness model for a large PEMFC stack. Based on the equivalent stiffness model, we discuss the effects of the structural parameters and temperature on the internal stress of the components and the contact resistance at the contact interfaces, and show how to determine the assembly parameters of a large fuel cell stack using the equivalent stiffness model. Finally, a three-dimensional finite element analysis (FEA) for a single PEMFC is compared with what the equivalent stiffness model predicts. It is found that the presented model gives very good prediction accuracy for the component stiffness and the clamping load. (C) 2009 Elsevier B.V. All rights reserved.