The purpose of this study is to evaluate how the toughness of photopolymerizable (meth)acrylate networks is influenced by physiological conditions. By utilizing two ternary (meth)acrylate networks, MA-co-MMA-co-PEGDMA and 2HEMA-co-BMA-co-PEGDMA, relationships between glass transition temperature (T-g), water content and state, and toughness were studied by varying the weight ratio of the linear monomers (MA to MMA or 2HEMA to BMA). Differential scanning calorimetry and thermogravimetric analysis were performed to evaluate the thermal behavior and water content as a function of either MA or 2HEMA concentration while tensile strain-to-failure tests were performed at 37 degrees C to determine network toughness. Both networks exhibited a maximum in toughness in PBS in the composition corresponding to a T-g close to the testing temperature. This toughness maximum was achieved by adjusting the glass transition temperature and/or hydrophilicity through changes in chemistry. These relationships may be utilized to design tough photopolymerizable networks for use in mechanically rigorous biomedical applications. (C) 2009 Elsevier Ltd. All rights reserved.