Blends of poly(ethylene terephthalate) (PET) and poly (ether esteramide) (PEEA), which is known as an ion conductive polymer, were prepared by melt mixing using a twin screw extruder. Antistatic performance of the molded plaques and the effects of adding ionomers such as lithium neutralized poly(ethylene-co-methacrylic acid) copolymer(E/MAA-Li), magnesium neutralized poly(ethylene-co-methacrylic acid) copolymer(E/MAA-Mg), and zinc neutralized poly(ethylene-co-methacrylic acid) copolymer (E/MAA-Zn) were investigated. Antistatic effect of adding poly(ethylene-co-methacrylic acid) copolymer(E/MAA) and polystyrene, and poly(ethylene naphthalate) (PEN) into PET/PEEA blends were also investigated. Here we confirmed that lithium ionomer worked the most effectively in those blend systems. We also confirmed that E/MAA worked to enhance the antistatic performance of PET/PEEA blends. Morphological study of these ternary blends system was conducted by TEM. Specific interaction between PEEA and E/MAA-Li, and E/MAA were observed. Those ionomers and copolymer domains were encapsulated by PEEA, which could increase the surface area of PEEA in PET matrix. This encapsulation effect explains the unexpected synergy for the static dissipation performance on addition of ionomers and E/MAA to PET/PEEA blends. POLYM. ENG. SCI., 48:2247-2257, 2008. (C) 2008 Society of Plastics Engineers