Wet granule breakage can occur in the granulation process, particularly in granulators with high agitation forces, such as high-shear mixers. In this paper, the granule breakage is studied in a breakage only high-shear mixer. Granule pellets made from different formulations with precisely controlled porosity and binder saturation were placed in a high-shear mixer in which the bulk medium is a non-granulating cohesive sand mixture. After subjecting the pellets to different mixing time in the granulator, the numbers of whole pellets without breakage are counted and taken as a measure of granule breakage. The experimental results showed that binder saturation, binder viscosity and surface tension as well as the primary powder size have significant influence on granule breakage behaviour. It is postulated that granule breakage is closely related to the granule yield strength, which can be calculated from a simple equation which includes both the capillary and viscous force of the liquid bridges in the granule. The Stokes deformation number calculated from the impact velocity and the granule dynamic strength gives a good prediction of whether the granule of certain formulation will break or not The model is completely based on the physical properties of the formulations such as binder viscosity, surface tension, binder saturation, granule porosity and particle size as well as particle shape. (C) 2008 Elsevier B.V. All rights reserved.