High shear granulation is a common technology for particle size enlargement, but generally the product properties are badly affected by the broad size distribution generated in the process. A recently published approach by Michaels et al. [J.N. Michaels, G. Wang, L Farber, K.P. Hapgood, J.H. Chou, S. Heidel, and G.I. Tardos, 2006, One-dimensional scale-up of high-shear granulators, Paper 243c, World Congress Particle Technology 5, Orlando (FL)] employs low binder solution spray rates and long granulation times, whilst the solids are kept in roping flow, to avoid coarse formation. The present work applies this approach to a two-component binder system with a dry powder gum and water spray as activation agent. Similarities with fluidised bed granulation and coating processes are explored. The work shows that indeed narrow size distributions of fine granules can be achieved with ease. Dimensionless numbers for spray fluxes are useful to identify operating regimes and to steer optimisation efforts. Comparison of flux numbers for different systems shows that they are not useful (yet) for detailed product and process design. Further work on material-specific quantities controlling nucleation and growth, e.g. particle wetting, is recommended. (C) 2008 Elsevier B.V. All rights reserved.