Titanium zirconium phosphate and organic polymer hybrid (poly-vinyl alcohol, (3-glycidoxypropyl)-trimethoxysilane and ethylene glycol) based membranes were investigated for their potential application as proton conductors. The hybrid materials were characterized by XRD, FTIR, SEM, TGA and impedance spectroscopy analysis. It was found that embedding of functionalised inorganic particles (TiZrP) into composite polymer matrix allowed for some crystallinity formation, and cross-linking of hydroxyl groups during annealing or reactions within the organic and inorganic phases during synthesis. A complex structure was formed, as many FTIR peaks were masked by more defined peaks assigned to P-O-R bonds. The high concentration of phosphorus in the TiZrP (1:1:9 molar ratio) samples resulted in more hydrophilic particles. This was further reflected in the hybrid membranes as the water losses increased from 13 to 25 wt.% as a function of the TiZrP content changing from 10 to 50 wt.% in the final hybrid membrane, respectively. As a result, proton conductivity increased by two to three orders of magnitude from blank (organic phase only) membranes (2.61 x 10(-5) S cm(-1)) to TiZrP hybrid membrane (2.41 x 10(-2) S cm(-1)) at 20 degrees C. Proton conduction changed as a function of temperature and the Ti1Zr1P9 particles content, mainly attributed to the membrane ability to retain water, thus complying with the Grotthus mechanism. (c) 2008 Elsevier B.V. All rights reserved.