In this study, the effects of different amounts of TiO2, ZrO2 and CaF2 nucleating agents on sinterability, crystallization, mechanical properties and chemical resistance of glass-ceramics belonging to the CaO-Al2O3-SiO2 system were investigated, using differential thermal analysis (DTA), X-ray diffractometry (XRD), scanning electron microscopy (SEM), mechanical and chemical resistance measurements. It was found that in CaF2 containing samples, the sinterability, crystallization and mechanical properties were improved by increasing of CaF2. amount. However, addition of ZrO2 and TiO2 increases the firing temperature required for complete densification of specimens. Our experiments showed that fluctuations of chemical composition of the residual glass phases during sintering were responsible for these dissimilar trends and greatly influenced mechanical and chemical properties. According to the obtained results, appropriate sinterability, acceptable mechanical and chemical properties. as well as desirable whiteness of the most promising specimens make them suitable choices for floor the applications. The main crystallization phases in all fully sintered glass-ceramics were wollastonite, anorthite and calcium aluminum silicate. (C) 2009 Elsevier B.V. All rights reserved.