- Previous Article
- Next Article
- Table of Contents
Applied Surface Science, Vol.256, No.18, 5691-5694, 2010
Formation and properties of high density Si nanodots
Laser induced crystallization of ultrathin hydrogenated amorphous Si films or amorphous Si-based multilayered structures were used to get high density Si nanodots. The present technique can get size controllable Si nanodots embedded in various dielectric materials with uniform distribution which was revealed by cross-section transmission electron microscopy. Room temperature photoluminescence and electroluminescence were achieved with the emission wavelength in a visible light region both from a-SiN/Si nanodots/a-SiN sandwiched and Si nanodots/SiO2 multilayered structures. The luminescence was associated with the radiative recombination of generated electron-hole pairs in Si nanodots or the luminescent surface states. The electroluminescence intensity is increased with increasing the injection current implying the bipolar carrier injection plays an important role in enhancing the luminescence efficiency. The formed Si nanodots by the present approach can be applied for many kinds of devices such as high efficient light emitting diodes and solar cells. (C) 2010 Elsevier B.V. All rights reserved.