Rhodium composite nanomaterials were synthesized by an innovating process called dry impregnation in a fluidized bed. It consists in spraying an aqueous colloidal suspension of rhodium on silica porous particles. The use of this precursor solution containing preformed nanoparticles avoids calcination/activation step. Different composite nanomaterials were prepared displaying various metal loadings. The operating conditions were tuned to modify tau(s), the solvent vapour saturation rate value, in order to influence the deposit location: either uniform on the whole silica particles or at the particles surface like a coating. tau(s) is defined as the ratio between solvent content in the bed atmosphere and the maximum solvent content. The obtained samples were investigated in catalytic hydrogenation of aromatic compounds under very mild conditions. Their catalytic performances were compared to those of the original colloidal suspension in one hand and of a similar catalyst prepared through wet impregnation in another hand. Interesting activity and selectivity were observed. This illustrates the interest of the dry impregnation method: this way allows an easy control of the metal loading as well as of the metal loading location in the support particles. Moreover, the support particle size and morphology are preserved. (C) 2009 Elsevier B.V. All rights reserved.