A wire-mesh sensor has been employed to study air/water and air/silicone oil two-phase flow in a vertical pipe of 67 mm diameter and 6 m length. The sensor was operated with a conductivity-measuring electronics for air/water flow and a permittivity-measuring one for air/silicone oil flow. The experimental setup enabled a direct comparison of both two-phase flow types for the given pipe geometry and volumetric flow rates of the flow constituents. The data have been interrogated at a number of levels. The time series of cross-sectionally averaged void fraction was used to determine characteristics in amplitude and frequency space. In a more three-dimensional examination, radial gas volume fraction profiles and bubble size distributions were processed from the wire-mesh sensor data and compared for both flow types. Information from time series and bubble size distribution data was used to identify flow patterns for each of the flow rates studied. (C) 2010 Elsevier Ltd. All rights reserved.