This work intends to study inhibitive performance of organic and inorganic complexes of Zn(II) using electrochemical techniques along with surface analysis. In this regard, inorganic zinc aluminum polyphosphate pigment as modified zinc phosphate and zinc acetylacetonate and benzimidazole mixture representing organic replacement of zinc phosphate were employed. Through taking advantage of electrochemical impedance spectroscopy and DC polarization, two mentioned approaches were indicated to be efficient. Charge transfer resistance and corrosion current density values exhibited superiority of zinc aluminum polyphosphate and mixture of zinc acetylacetonate and benzimidazole compared to zinc phosphate and also zinc acetylacetonate and benzimidazole as individual inhibitors. Corrosion inhibition efficiencies calculated based on charge transfer resistance in consistent with those calculated from corrosion current density showed the following sequence; zinc aluminum polyphosphate > mixture of zinc acetylacetonate and benzimidazole > zinc acetylacetonate > zinc phosphate > benzimidazole. Showing film formation, surface analysis SEM/EDX confirmed the results obtained by electrochemical methods. (C) 2009 Elsevier Ltd. All rights reserved.