Chemisorption of oxygen on Spherocarb has been performed to determine the surface oxide formation and the initial adsorption rate of Spherocarb, at the temperature range of 360K to 851K and oxygen pressure range of 0.05 to 1 atmosphere respectively. The maximum amount of oxygen adsorbed is estimated to occupy 91.8 m²/gC or 10% of the total surface area (TSA). The rate of chemisorption of oxygen on Spherocarb is very rapid in the beginning but it slows down with coverage. The initial oxygen chemisorption data can be linearized when plotted as amount adsorbed vs.ln (time). The data can be fitted to he integrated form of the Elovich equation, which is q=1/b^*ln(1+abt) where q is the amount adsorbed and a and b are constants. This equation is applicable to the adsorption data for a wide variety of systems. A study of the variation of oxygen up-take with temperature during the first minutes of chemisorption for Spherocarb has suggested that chemisorption is the rate-controlling process initially while diffusion of oxygen and the desorption of oxidation products rapidly assume control of the oxidation rate. The experimental results show that oxygen chemisorption has an activation energy between 12K cal/mole and 25 Kcal/mole. It can be modeled using the Elovich equation and the initial amount chemisorbed increases in direct proportion to carbon conversion.