MODELING AND SIMULATION OF A NITRIC ACID RECOVERY PROCESS

Oh SC; Oh YS; Yeo YK

Korean Journal of Chemical Engineering, Vol.12, No.3, 366-371, July, 1995

A nitric acid recovery process using composite distillation columns was modeled and simulated. The composite distillation columns consist of a multistage vacuum tower and an atmospheric pressure tower half of which consists of packed bed. The vacuum tower and the atmospheric pressure tower were modeled by using equilibrium stage method and non-equilibrium stage method respectively. The required thermodynamic properties for nitric acid solution were obtained from correlations based on experimental data. Results of simulations showed good agreement with actual plant data. From the results of simulations it was found that the upper half of the atmospheric pressure column and the vacuum column, consisting of plate column, can be modeled effectively using non-equilibrium model. The non-equilibrium model developed in the present study showed good agreement with actual operation data.

Keywords:Nitric Acid;Multistage Distillation Column;Simulation;Equilibrium Model;Non-equilibrium Model

[References]

Bravo JL, Fair JR, Ind. Eng. Chem. Process Des. Dev., 21, 162 (1982)
Cho YS, Joseph B, AIChE J., 29, 261 (1983)
Cho YS, Joseph B, AIChE J., 29, 270 (1983)
Henley EJ, Seader JD, "Equilibrium-Stage Separation Operations in Chemical Engineering," John Wiley & Sons, Inc. (1981)
Holland CD, "Fundamentals and Modeling of Separation Processes," Prentice Hall, Englewood Cliffs, NJ (1975)
Kelly RM, Rousseau RW, Ferrell JK, Ind. Eng. Chem. Process Des. Dev., 23, 102 (1984)
Krishnamurthy R, Taylor R, AIChE J., 31, 449 (1984)
Krishnamurthy R, Taylor R, AIChE J., 31, 456 (1984)
Krishnamurthy R, Taylor R, Ind. Eng. Chem. Process Des. Dev., 24, 513 (1985)
Perry RH, Chilton CH, "Chemical Engineers Handbooks," 5th ed., McGraw-Hill, New York (1973)
Schweitzer PA, "Handbook of Separation Techniques for Chemical Engineers," McGraw-Hill, New York (1979)
Seader JD, Chem. Eng. Prog., Oct., 41 (1989)
Sherwood TK, Pigford RL, Wilke CR, "Mass Transfer," McGraw-Hill, New York (1975)

[Referenced By]

[1] Bravo JL, Fair JR, Ind. Eng. Chem. Process Des. Dev., 21, 162 (1982)

[2] Cho YS, Joseph B, AIChE J., 29, 261 (1983)

[3] Cho YS, Joseph B, AIChE J., 29, 270 (1983)

[4] Henley EJ, Seader JD, "Equilibrium-Stage Separation Operations in Chemical Engineering," John Wiley & Sons, Inc. (1981)

[5] Holland CD, "Fundamentals and Modeling of Separation Processes," Prentice Hall, Englewood Cliffs, NJ (1975)

[6] Kelly RM, Rousseau RW, Ferrell JK, Ind. Eng. Chem. Process Des. Dev., 23, 102 (1984)

[7] Krishnamurthy R, Taylor R, AIChE J., 31, 449 (1984)

[8] Krishnamurthy R, Taylor R, AIChE J., 31, 456 (1984)

[9] Krishnamurthy R, Taylor R, Ind. Eng. Chem. Process Des. Dev., 24, 513 (1985)

[10] Perry RH, Chilton CH, "Chemical Engineers Handbooks," 5th ed., McGraw-Hill, New York (1973)

[11] Schweitzer PA, "Handbook of Separation Techniques for Chemical Engineers," McGraw-Hill, New York (1979)

[12] Seader JD, Chem. Eng. Prog., Oct., 41 (1989)

[13] Sherwood TK, Pigford RL, Wilke CR, "Mass Transfer," McGraw-Hill, New York (1975)