This work investigates the effects of a shield on the thermal and hydraulic characteristics of plate-fin vapor chamber heat sinks under cross flow cooling. The surface temperature distributions of the vapor chamber heat sinks are measured using infrared thermography. The thermal-fluid performance of vapor chamber heat sinks with a shield is determined by varying the fin width, the fin height, the fin number and the Reynolds number. The experimental data thus obtained are compared with those without a shield. Experimental results indicate that the maximum surface temperature of the vapor chamber heat sink is effectively reduced by adding the shield, which forces more cooling fluid into the inter-fin channel to exchange heat with the heat sink. However, using the shield increases the pressure drop across the heat sink. The experimental data also show that the enhancement of the heat transfer increases with the Reynolds number, but the improvement declines as the Reynolds number increases. When the pumping power and heat transfer are simultaneously considered, vapor chamber heat sinks with thinner, higher or more fins exhibit better thermal-hydraulic performance. (C) 2010 Elsevier Ltd. All rights reserved.