In this work, the passivity and pitting corrosion behavior of 3003 aluminum (Al) alloy in ethylene glycol-water solutions was investigated using various electrochemical measurements, Mott-Schottky analysis and surface analysis techniques. Results demonstrate that the passive film formed on Al alloy contains both Al oxide and Al alcohol, showing an n-type semiconductor in nature. There is an enhanced corrosion resistance of the Al-alcohol film, which is resistant to adsorption of chloride ions. The pitting corrosion of 3003 Al alloy occurs in the solutions containing a low concentration of ethylene glycol only, where the formed film is dominated by Al oxide. Chloride ions attack and replace the oxygen vacancies in the film, resulting in a local detachment of the film from the Al alloy. A galvanic effect exists between Al alloy substrate and the adjacent second phase particles. Pits form when Al alloy substrate is dissolved away and the second phase particles drop off from the substrate.