Journal of Catalysis, Vol.269, No.2, 351-358, 2010
Characterization of catalysts in their active state by adsorption microcalorimetry: Experimental design and application to sulfated zirconia
A method to characterize the surface sites of catalysts in their active state by adsorption microcalorimetry was developed. A calorimeter cell was used as a flow-type reactor, and the skeletal isomerization of n-butane (1 kPa) at 378 K and atmospheric pressure proceeded at comparable rates and with the same states of induction period, maximum and deactivation phase as in a tubular reactor. The reaction was run for selected times on stream and after the removal of weakly adsorbed species, n-butane or isobutane were adsorbed at 313 K. The surface of activated sulfated zirconia was characterized by at least two different sites for n-butane adsorption, a small group of sites (about 20 mu mol g(-1)) that yielded heats of 50-60 kJ mol(-1) and sites that were populated at higher pressures (above about 5 hPa n-butane) and yielded heats of about 40 kJ mol(-1). The strongly interacting sites disappear during the induction period and are proposed to be the sites where the isomerization reaction is initiated. (C) 2009 Elsevier Inc. All rights reserved.