Melt-compounding is a technique which has been commonly used for producing polymer-clay nanocomposites with enhanced mechanical, thermal, and physical properties. Twin-screw extruders have been found to effectively exfoliate the clay platelets due to their high shear intensity. However, concerns about polymer and organoclay degradation have been raised in some studies. In this investigation, a composite of nylon 6-Cloisite 30B with fully exfoliated and well-dispersed clay particles was produced using a single-screw extruder and hence with limited polymer degradation. We show that processing temperature plays an important role in enhancing dispersion and that reprocessing at a higher temperature can enhance both dispersion and exfoliation and thus can result in composites with superior properties. We attempt to elucidate how the change in melt viscosity-coupled with the change in processing temperature-affects clay exfoliation and dispersion.