This research addresses the problem of localised corrosion of stainless steel PEMFC bipolar plates. The susceptibility to pitting and crevice corrosion of austenitic AISI 304 stainless steel has been investigated both by post-mortem microscopic analysis of the end-plates of a laboratory single-cell and by studies of electrochemically corroded stainless steels, in the presence of specially-designed crevice-formers simulating the operating conditions of a PEMFC. This work is based on optical and scanning-electron microscopies as well as potentiostatic and potentiodynamic measurements. The crevice-formers we considered were: Teflon, graphite and AISI 304. The samples, coupled to the crevice-formers have been tested in aqueous solutions containing Cl-, SO42- and F-. From the E-logi plot, the values of corrosion, pitting, crevice and protection potential have been obtained and perfect and imperfect passivity conditions have been identified. (C) 2009 Elsevier B.V. All rights reserved.