A study of a phosphoric acid doped polybenzimidazole (PBI) membrane fuel cell using commercial carbon supported, Pt alloy oxygen reduction catalysts is reported. The cathodes were from PTFE bonded carbon supported Pt alloys without PBI but with phopshoric acid added to the electrode for ionic conductivity. Polarisation data for fuel cells with cathodes made with alloys of Pt with Ni, Co, Ru and Fe are compared with those with Pt alone as cathode at temperatures between 120 and 175 degrees C. With the same loading of Pt enhancement in cell performance was achieved with all alloys except Pt-Ru, in the low current density activation kinetics region of operation. The extent of enhancement depended upon the operation temperature and also the catalyst loading. In particular a Pt-Co alloy produced performance significantly better than pt alone, e.g. a peak power, with low pressure air, of 0.25W cm(-2) with 0.2mg Pt cm(-2) of a 20 wt % Pt-Co catalyst. (C) 2010 Elsevier B.V. All rights reserved.