화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Korean Chemical Engineering Research, Vol.49, No.3, 301-305, June, 2011
Export Citation
ABS/실리케이트 복합체의 제조 및 열적특성 연구
Study on Fabrication and Thermal Properties of the ABS/silicate Composites
윤이슬, 김연철†
  • 공주대학교 고분자공학전공, 330-717 충남 천안시 부대동 275
Lee Seol Youn, and Youn Cheol Kim†
  • Major in Polymer Science & Engineering, Kongju National University, 275 Budae-dong, Cheonan-si, Chungnam 330-717, Korea
E-mail:
초록
ABS/실리케이트 복합체를 clay의 종류 및 함량을 변화시키며 에멀젼 중합을 이용하여 제조하였다. ABS의 화학구조는 적외선분광기(FT-IR)를 이용하여 이중결합 C-H 신축진동 피크(3000 cm^(-1) 근처)의 변화를 통해 확인하였다. ABS/실리케이트 복합체의 열적특성은 시차주사열용량분석기(DSC) 와 열중량분석기(TGA)를 이용하여 관찰하였다. Clay의 종류에 따른 ABS의 유리전이온도에는 큰 변화가 나타나지 않음을 알 수 있었다. TGA에 의한 분해온도는 20A의 함량이 3 wt%인 ABS/20A 복합체에서 가장 높은 값을 나타내었다. 복합체의 실리케이트 분산정도는 X-선회절(XRD)법을 이용하여 측정하였다. ABS/20A 복합체의 실리케이트 분산은 20A 함량에 의존하였고, 함량이 5 wt% 이상 첨가되었을 때 20A의 회절 피크가 나타나는 것을 확인하였다.
ABS/silicate composites with different clay types and compositions were prepared by in situ emulsion polymerization. The chemical structure of ABS was confirmed by the change of C-H stretching peak(near 3000 cm^(-1)) in fourier transform-infrared(FT-IR) spectrum. The thermal properties of the ABS/silicate composites were investigated by differential scanning calorimetry(DSC) and thermogravimetric analyzer(TGA). There was no distinct change in glass transition temperature of the ABS/silicate composites with different clay types. TGA curve indicates a dramatic increase in degradation temperature in case of ABS/20A composite with 3 wt% 20A. The silicate dispersion in the composites was measured by X-ray diffraction(XRD). The silicate dispersion in ABS/20A composites depended on the 20A composition. XRD results showed that the diffraction peak of the ABS/20A composite appeared when the content of 20A was higher than 5 wt%.
Keywords:ABS/silicate Composite;Emulsion;Silicate Dispersion;Thermal Properties
  1. Nam PH, Maiti P, Okamoto M, Kotaka T, Hasegawa N, Usuki A, Polymer, “A Hierarchical Structure and Properties of Intercalated Polypropylene/clay Nanocomposites", 42(23), 9633 (2001)
  2. Zheng L, Farris RJ, Coughlin EB, Macromolecules, “Novel Polyofefin Nanocomposites: Synthesis and Characterizations of Metallocenecatalyzed Polyolefin Polyhedral Oligomeric Silsesquioxane Copolymers", 34(23), 8034 (2001)
  3. Liu XH, Wu QJ, Polymer, “PP/clay Nanocomposites Prepared by Grafting-melt Intercalation", 42(25), 10013 (2001)
  4. Lele A, Mackley M, Galgali G, Ramesh C, J. Rheol., “In Situ Rheox-ray Investigation of Flow-induced Orientation in Layered Silicate-syndiotatic Polypropylene Nanocomposite melt", 46(5), 1091 (2002)
  5. Li J, Zhou C, Gang W, Polym. Test., “Study on Nonisothermal Crystallization of Maleic Anhydride Grafted Polypropylene/montmorillonite Nanocomposite", 22, 217 (2003)
  6. Kim YC, Polym. J., “Effect of Maleated Polyethylene on the Crystallization Behavior of LLDPE/clay Nanocomposites", 38, 250 (2006)
  7. Cho MS, Lee YK, Polymer(Korea)., “Polymer Nanocomposites Using Nano Clay", 27, 31 (2006)
  8. Choi YS, Chung IJ, Korean Chem. Eng. Res., “Comprehending Polymer-Clay Nanocomposites and Their Future Works", 46(1), 23 (2008)
  9. Kulich DM, Kelly PD, Pace JE, “Encyclopedia of Polymer Science and Engineering" John Wiley and Sons, New York (1985)
  10. Rubin II, “Hand book of Plastic Materials and Technology" Wiley, New York (1990)
  11. Ro YC, Choi SO, Lee JH, Name KD, HWAHAK KONGHAK, “Nickel Plating Techniques of Blend of ABS-PC Engineering Plastics", 34(6), 683 (1996)
  12. Jang LW, Kang CM, Lee DC, J. Polym. Sci. B: Polym. Phys., “A New Hybrid Nanocomposite Prepared by Emulsion Copolymerization of ABS in the Presence of Clay", 39(6), 719 (2001)
  13. Choi YS, Xu MZ, Chung IJ, Polymer, “Synthesis of Exfoliated Acrylonitrile-butadiene-styrene Copolymer (ABS) Clay Nanocomposites: Role of Clay as a Colloidal Stabilizer", 46(2), 531 (2005)
  14. Modesti M, Besco S, Lorenzetti A, Causin V, Marega C, Gilman JW, Fox DN, Trulove PC, De Long HC, Zammarano M, Macromolecules., “ABS/clay Nanocomposites Obtained by a Solution Technique: Influenece of Clay Organic Modifiers", 2209 (2007)
  15. Pourabas B, Raeesi V, Polymer, “Preparation of ABS/montmorillonite Nanocomposite Using a Solvent/non-solvent Method", 46(15), 5533 (2005)
  16. Kim JH, Study on Synthesis of Polymer/Layered Silicate Nanocomposites using Reactive Amphiphiles and their Characterization, Ph.D thesis, KAIST (2007)
  17. Kim JH, Kim K, Kim YC, Chung IJ, Polymer J., “Effect of Reactive Amphiphiles on the Silicate Dispersion and Degradation Behavior of ABS/layered Silicate Nanocomposites", 40, 268 (2008)
  18. Wang S, Hu Y, Song L, Wang Z, Chen Z, Fan W, Polymer Degradation Stability., “Preparation and Thermal Properties of ABS/montmorillonite Nanocomposite", 77, 423 (2002)
  19. Lim SK, Hong EP, Song YH, Park BJ, Choi HJ, Chin IJ, Polym. Eng. Sci., “Preparation and Interaction Characteristics of Exfoliated ABS/Organoclay Nanocomposite", 50(3), 504 (2010)